![]() Use a socket wrench to secure the battery to the bracket so that it will not shift, tip, or otherwise move while driving. Lower the new car battery into the battery bracket. The wrong battery may be too big or too small for the battery bracket, making reinstallation impossible. Record your vehicle’s year, make, model, and engine size to ensure you buy the right kind of replacement car battery. RELATED: Buyer’s Guide: The Best Battery Chargers for the Car STEP 6: Install the new car battery. Do not throw it into the garbage or store it in or around your home. Once the old vehicle battery has been removed, set it aside in a safe spot for proper disposal. Something to note about how to remove a car battery that sometimes goes overlooked is that car batteries can weigh 20 pounds or more, so you might need help to lift it out. Use a socket wrench with an extension bar to loosen these connections and lift the battery out of the battery bracket. The car battery is usually held in place with multiple connectors to prevent it from moving or shifting while you drive. Photo: STEP 5: Remove the old car battery. Secure the cable to the engine bay with a cable clamp, avoiding any contact with the battery, negative cable, or metal surfaces. Loosen the nut holding the positive cable in place and slide the cable off of the positive terminal. The connector will likely be covered by a red plastic cap, and the terminal may be marked with a plus (+) sign. ![]() With the negative cable safely disconnected and secured, locate the red positive cable. Secure the cable to the engine bay with a cable clamp to keep it away from the battery, the positive cable, and metal surfaces. Slide the cable off of the negative terminal. Use a compatible socket wrench to loosen the nut holding the negative cable in place. The negative cable always needs to be disconnected first and reconnected last to avoid sparking, short circuits, or melting. If applicable, remove the plastic battery cover from the battery and locate the black negative terminal cable. The negative battery terminal is usually black and may be identified by a minus (-) sign on the car battery. Photo: STEP 3: Disconnect the negative cable. RELATED: 14 Things You Never Thought to Keep in Your Car Note that when you remove the battery, it will likely reset the clock, radio, navigation system, and alarm settings, so these may need to be reset after following the steps on how to install a car battery further below. Remove the keys from the ignition to ensure that no power is going to the battery. Make sure the vehicle is in park, engage the handbrake, and turn the vehicle off. Ideally this spot is in a private and secure area, like your driveway, garage, or-in a pinch-a parking lot or roadside. STEP 1: Park the vehicle on level ground. If you have one of these eco-friendly vehicles, have the battery replaced by a professional mechanic. Replacing a hybrid or electric car battery is not typically a DIY job. Make sure to follow all safety precautions and steps below in the order indicated to avoid harm. Vehicle batteries are also moderately heavy, so some people may need assistance to remove and lift one out of a car. Project OverviewĮstimated Cost: $80 to $200 or more, depending on the battery Before You BeginĪ car battery is a powerful electrical device that can severely damage a vehicle and injure a person if it is not handled carefully. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |